Contact Equipment

A-Frame   |   Dog Walk   |   Teeter   |   Table

Aluminum line of equipment

It looks beautiful and is so light weight. It is specially designed structurally for ALUMINIUM strength and durability in competitions, while maintaining all the same wonderful adjustment features Hill Agility Equipment is known for.

Powdercoated Steel Line of Equipment

Our standard powdercoated steel equipment is designed to offer everything in durability, versatility, and looks, this at lower prices from our premium lightweight Aluminum line. Sandblasting/powdercoating is standard on all steel equipment to offer beautiful looking finish durability for outside year round use.

Super grippy, paw friendly traction on wood is applied using playground sand, just have a look at our Manufacturing Page for better details on this.

UNLESS otherwise specified with an order, standard dimensions of all our contact equipment is for AAC organizational standards. Many other organizations overlap within the same or very similar specifications. NADAC, USDAA, CKC, AKC etc. We will build within any requested dimensions, however, for some of the less common specs, we may require some additional custom build charges, please e-mail us with any enquiries.

3 foot by 9 foot Aluminum a-Frame

This Premium light weight a-frame is simply a breeze to lift and move around.

• Uses lightweight Mahogany Marine plywood, which is commonly used for Kayaks, for great strength, while remaining lightweight.
• Slats where applicable, are made from high quality Baltic Birch laminates, screwed and glued into place for long term durability.
• Very easily adjustable single chain, while remaining very strong, stable on ground and secure.
• Contact zones are 42 inches unless otherwise requested.
• Any other dimensions of frames available upon custom request.

Pricing

Aluminum (non-powdercoated) - no slats - $1225.00, slats - $1325.00. Aluminum (non-powdercoated) A-frame with chain, frame only without wood - $850.00 Powdercoated Aluminum- no slats - $1375.00, slats - $1475.00. (Powdercoating on Aluminum equipment is basically cosmetic only, as the bare Aluminum stands up wonderfully well in the elements, and also looks great too) Aluminum Powdercoated A-frame with chain, frame only without wood - $1000.00

Aluminum A-Frame Pictures

GO BACK TO TOP

Tapered Aluminum A-frame

This highly stable 9 foot long a-frame is 3 foot wide at the top and 4 foot wide at the bottom.

• Uses lightweight Mahogany Marine plywood, which is commonly used for Kayaks, for great strength, while remaining lightweight.
• Slats, where applicable, are Baltic Birch laminates
• A quick and easy adjusting single chain.
• Yellow Contact zones are 42 inches unless otherwise requested.

Pricing

Aluminum (non-powdercoated) - no slats - $1360.00, slats - $1560.00. Aluminum (non-powdercoated) A-frame with chain, frame only without wood - $950.00 Powdercoated Aluminum - no slats - $1535.00, slats - $1735.00. (powdercoating on Aluminum equipment is basically cosmetic only, as the bare Aluminum stands up wonderfully in the elements and also looks great too) Aluminum Powdercoated A-frame with chain, frame only without wood - $1125.00

GO BACK TO TOP

3 foot by 9 foot Steel a-frame

This Beautiful Powdercoated steel a-frame is very durable, yet remaining of more economy pricing from its Aluminum counterpart.

• Ramps are 3 feet wide and 9 feet long
• 42 inch yellow contact zones, unless otherwise requested.
• A single chain system is used for very quick height adjustments, yet very stable and strong.
• Wood used is a 1/2 inch exterior plywood.
• Slats, where applicable, are 1 1/4 inch wide by 1/4 inch thick Baltic Birch laminates, screwed and glued securely in place for long term durability
• custom frame or slat sizing available upon request

Pricing
	3-foot wide Powder-coated Steel a-frame - no slats - $970.00, slats - $1070.00. 3-foot wide powdercoated a-frame with chain, frame only without wood - $670.00

Steel A-Frame Pictures

GO BACK TO TOP

Tapered Steel a-frame

This Beautiful Powdercoated steel a-frame is very durable, yet remaining of more economy pricing from its Aluminum counterpart.

• 3 feet wide at the top, 4 foot at bottom, and 9 feet long
• 42 inch yellow contact zones, unless otherwise requested.
• A single chain system is used for very quick height adjustments, very stable and strong.
• Wood used is a 1/2 inch exterior plywood.
• Slats, where applicable, are 1 1/4 inch wide by 1/4 inch thick Baltic Birch laminates, screwed and glued securely in place for long term durability
• Custom frame or slat sizing available upon request

Pricing
	Tapered Powdercoated Steel A-Frame - no slats - $1195.00, slats - $1395.00. Tapered Powdercoated Steel A-Frame with chain, frame only without wood - $770.00

GO BACK TO TOP

Aluminum adjustable height dog walk

We have been thanked by many customers, and even hugged by one, for this Dog walks wonderful light weight, as well for it's ease in adjustable features, while remaining solidly strong and durable.

• Height adjusts from the full 4 foot competition height, down to a very low training height of approx. two foot high, with several in-between heights.
• Adjustments done by simply removing the lock pin and pivoting the leg assembly's inward or outward, replace lock pin in the slide tube at preferred position.
• very solid and stable at all heights, including the lowest position.
• Ramps come with very lightweight Mahogany Marine plywood. This wood is of very high quality and commonly used for Kayaks, for great strength, while remaining lightweight.
• 36 inch contact zones, unless otherwise requested
• 12 inch wide by 12 foot long ramps.

Look how light the dog walks are! View with Windows Media
A 60+ year old can pick them up easily.

Pricing
	Aluminum (Non-powdercoated) - no slats - $1555.00, slats - $1655.00. Powder-coated Aluminum - no slats - $1755.00, slats - $1855.00 (Powdercoating on Aluminum equipment is basically cosmetic only, as the bare Aluminum stands up wonderfully in the elements and also looks great too)

Aluminum Dog Walk Pictures

GO BACK TO TOP

Steel adjustable height powdercoated dog walk

This beautiful dog walk is a breeze to adjust from a full competition height of 4 foot height, all the way down to approx. 2 foot for safe training.

• Beautiful Powdercoated finish to ward off the elements
• Height adjustments are easily done just be removing the lock pin and moving the leg assembly's inward or out, then returning the loc pin in the slide tube at the desired available height.
• Ramps use 1/2 inch thick exterior plywood
• Slats where applicable, are 1 1/4 inch wide by 1/4 inch thick Baltic birch laminates.
• Comes standard with 36 inch contact zones , other specs available upon custom request

Pricing
	Powder-coated Steel adjustable height dog walk - no slats - $1295.00, slats - $1395.00.

Steel Dog Walk Pictures

GO BACK TO TOP

These beautifully versatile teeters are approx. 18 LBS lighter than their steel counterpart versions, a breeze to lift and move, yet are remarkably strong, durable and stable even at its lowest height of approx. 10 inches.

TOUGH TESTED This aluminum design has been thoroughly tested for almost three years now in regular hard training use and many competitions. Please visit our testimonials page to read what our customer says about this product.

We now are ready to offer this teeter in our product line, for It has proven to work wonderfully for beginner training at lower heights, as well to have stood the test of time in strength and durability with hard competition use.

Available with a wide PROFILE and NARROW profile base option. This is simply for different organizational standards, with the hinge point being visible from a straight on entry with the wide profile base, and with the narrow profile base hinge point is tucked underneath.....Both maintaining the exact same stability on the ground with use. Narrow base teeter is our most common seller of the two styles.

• It quickly adjusts from approximately 10 inches to 24 inches, with several in-between positions
• Very light weight.
• The height is easily adjustable through the use of a simple slide tube assembly and loc pin, which keeps the teeter solid at all chosen heights.
• Aluminum ramps are 12 inch wide by 12 foot long.
• Wood on ramps are a lightweight Mahogany Marine plywood. This wood is commonly used for Kayaks, for great strength, while remaining lightweight.
• The removable leg assembly's also fold flat on the frame for easy storage.
• Sand traction and paint quality is exceptional.
• Holes in legs for staking down
• 36 inch yellow contact zones, unless otherwise requested.

Narrow Profile Base, Aluminum Adjustable Height Teeter

This wonderfully light teeter is the lightest of teeters we offer, and if a wide profile base is not required, this design is recommended, lighter and our most commonly sold in the Aluminum line.

Pricing
	Narrow profile base, Aluminum (non-powdercoated) teeter: $745.00 Powdercoated narrow profile base Aluminum teeter: $845.00

Pictures

(PICTURES COMING SOON, very similar to steel version, just structurally designed slightly different for Aluminum)

Wide Profile Base, Aluminum adjustable height teeter

This teeter offers very a very light weight design with a wider view point at the hinging part of the base. This is required in some organizations to see the hinge point protruding outward from a straight on entry. Identical in adjustment design as the Narrow base, with same stability.

Pricing
	Wide profile base Aluminum teeter (non-powdercoated): $795.00 Powdercoated wide profile base Aluminum teeter: $895.00

Pictures

(PICTURES COMING SOON, very similar to steel version, just structurally designed slightly different for Aluminum)

GO BACK TO TOP

This beautiful looking product has been our workhorse teeter for over 8 years now, with its tough, yet very easy height adjustment feature.

Wide PROFILE and NARROW profile base option is simply for different organizational standards with the hinge point being visible from a straight on entry with the wide profile base, and with the narrow profile base, hinge point is tucked underneath.....Both maintaining the exact same stability on the ground with use. If the wide profile base is not required, the narrow profile base design is most recommended, lighter and our most commonly sold of all teeters.

• Adjusting from approx. 10 inches low training height, all the way up to the full 24 inch competition height, with several in-between positions.
• Height adjustments quickly lock solidly in place with a simple pin through the slide tube adjustment holes.
• The removable leg assembly's also fold flat on the frame for easy storage.
• Uses 1/2 inch exterior plywood, with exceptional sand traction and paint quality.

Narrow Profile Base - Pricing
	PowderCoated Steel - $545.00 (If a wide profile base is not required, this design is most recommended, lighter and our most commonly sold of ALL our teeters)

Narrow Profile Base Teeter Pictures

Wide Profile Base - Pricing
	PowderCoated Steel - $575.00

Wide Profile Base Teeter Pictures

GO BACK TO TOP

This beautiful looking, light weight Aluminum table is highly recommended for anybody who wants to move their equipment with the utmost of ease.

• 3 feet square and comes with 2 sets of legs, 22" and 10" (unless otherwise requested).
• legs attach by sliding into the tube underneath, and simply giving the thumb screw a tighten.
• Additional sets of legs are available upon custom request.
• Extra legs store under the table.
• Wood is made from very lightweight Mahogany Marine plywood. This wood is commonly used for Kayaks, for great strength, while remaining extremely lightweight.
• Sand traction and paint quality is exceptional.
• Sides are over 4 inch deep with thin, yet very strong lightweight Aluminum

Pricing
	Aluminum table (non-powdercoated) - $445.00. Aluminum (non-powdercoated) table without wood - $345.00 Powdercoated Aluminum Table - $495.00 Aluminum powdercoated table without wood - $395.00

Pictures

(Pictures coming soon)

GO BACK TO TOP

This wonderfully strong beautiful table is almost identical to the Aluminum version, offering a more economy price.

• 3 feet square and comes with approx. 4 inch deep sides of thin steel.
• Beautiful long lasting powdercoating finish
• The legs attach by sliding into the tube underneath, and simply giving the thumb screw a tighten.
• 2 sets of legs for 22" and 10" (unless otherwise requested.)
• Extra legs store securely under the table.
• Additional sets of legs are available upon custom request.
• The wood is made from 1/2 inch exterior plywood, with Sand traction and paint of exceptional quality.

Pricing
	Powdercoated Steel Table -$325.00

Pictures

GO BACK TO TOP